XADO Gel for Manual Transmission

Procedure of treating
Squeeze out the revitalizant into the oil filler neck of gear box, transfer case or differential according to the following chart.
Revitalizing is considered to be complete after 50 operating hours or 930 miles (1,500 km) run.

Note!
1. A sure sign of the beginning of revitalization is mechanism noise reduction as early as the first few miles. If noise reduction (improvement of mechanism running) stops at any time, this fact points to a heavy wear of the mechanism, so it is necessary to double the recommended dose.
2. If after 60 - 120 miles (100-200 km) run the mechanism fails to improve its performance, the most probable cause of this is a faulty diagnostics.
3. DO NOT use in automatic transmission!

This page from XADO Catalog provides some more general and usage information.

Alternatively you may download application guide as  a pdf file below